Heat Treated Pallets Guide

Heat Treated Pallets: A Guide to Export Rules, Costs & Plastic Exemptions

Heat treated pallets are the passport for wood on export lanes. Here is what ISPM 15 requires, how to read the stamp, what a rejected pallet really costs and when plastic skips the rule.

By Rodrigo Castro, Co-Founder & President13 min read
Wooden Euro pallets with stamped corner blocks leaning against a post at a loading dock

A container of machine parts reaches a European port on schedule. The paperwork is clean and the goods are fine. Then an inspector turns over one pallet and finds no stamp, or a stamp half hidden under a repair board, and the whole box stops moving.

That is the job heat treated pallets do: they let wood packaging cross borders without carrying pests with it. This guide explains what heat treatment under ISPM 15 actually involves, how the rules change by destination, how to read the stamp, what treatment costs and what a rejection costs, and when a plastic pallet takes the question off the table.

We make plastic pallets, so we have a view on the last part. We have kept it to its own chapter, after the rules.

Key Takeaways

  • Heat treated pallets have had every piece of wood held at 56°C at the core for 30 continuous minutes, the ISPM 15 schedule, and carry a mark that proves it.
  • The stamp has four parts: the IPPC symbol, a two-letter country code, a producer or treatment provider code, and a treatment code such as HT.
  • Replacing more than about one third of a pallet's parts voids its treatment. It must be re-treated and marked again.
  • Noncompliant wood packaging is refused entry to the U.S. and can be reexported or destroyed, with delay costs that dwarf the pallet price.
  • ISPM 15 regulates wood only. Plastic pallets need no heat treatment, fumigation or stamp.

What Heat Treated Pallets Are

Heat treated pallets are wood pallets whose lumber has been heated until the core of every piece reached at least 56°C (about 133°F) and held there for at least 30 continuous minutes. That schedule comes from ISPM 15, the international standard for wood packaging, and it exists for one reason: to kill insects and nematodes living inside the wood before a pallet carries them across a border.

The pallet itself is ordinary. Heat treated wood pallets look, weigh and carry the same as untreated ones. What makes them different is the treatment record behind them and the mark stamped on them, which tells customs officers in more than one country that the wood was treated by a provider their own plant protection agency can trace.

56°CMinimum core temperature for conventional heat treatment (HT)IPPC, ISPM 15, 2018
30 minContinuous time the whole wood profile must hold that temperatureIPPC, ISPM 15, 2018
60°CMinimum for dielectric (microwave or radio wave) heating, DHIPPC, ISPM 15, 2018
1 minContinuous time required at 60°C under dielectric heatingIPPC, ISPM 15, 2018

Treatment is only half the rule. ISPM 15 also requires debarked wood, with a small tolerance: separate pieces of bark may remain if they are under 3 cm wide, or wider but under 50 square centimeters each. Bark is where many pests overwinter, so an untidy pallet can fail inspection even with a valid stamp.

Not everything made of wood is covered. The standard exempts packaging made entirely of wood 6 mm thick or less, processed wood such as plywood, particle board and oriented strand board made with glue, heat or pressure, heated wine and spirit barrels, sawdust and wood wool, and wood permanently attached to containers or trailers.

Heat Treated Wood Pallets vs Kiln Dried Lumber

These two get mixed up constantly because both involve a hot chamber. Kiln drying is a lumber process aimed at moisture content. Heat treatment under ISPM 15 is a pest process aimed at core temperature. One can produce the other, but only with proof.

ISPM 15 allows treatment in kiln-drying chambers, as long as the schedule has been tested to show the core of the wood holds 56°C for 30 continuous minutes, with core temperature sensors or validated air temperature schedules approved by the national plant protection agency. A kiln-dried board that never went through a validated schedule, and never got marked, is not compliant for export, however dry it is.

Kiln dried lumberHeat treated (HT) pallet
GoalLower moisture contentKill pests in the wood
Pass testTarget moisture reached56°C core for 30 continuous minutes
ProofLumber grade stamp, if anyISPM 15 mark from an approved provider
Accepted for exportNot on its ownYes, where ISPM 15 applies
Source: IPPC, ISPM 15, Annex 1, 2018.

Methyl Bromide Pallets

Methyl bromide pallets were fumigated with gas instead of heated, and they carry the code MB in their mark. The method is still in the standard, but ISPM 15 tells national agencies to promote the alternatives and points to the IPPC's recommendation to replace or reduce methyl bromide, an ozone-depleting gas. Wood thicker than 20 cm at its smallest cross-section cannot be treated with it at all.

In practice, heat has won. Under its ozone rules, the European Union ended methyl bromide use for quarantine and pre-shipment treatments, the category that covers wood packaging, as of March 18, 2010, as Regulation (EU) No 1087/2013 confirms. If a supplier quotes methyl bromide pallets for an export lane, ask why, and check the destination first.

Watch Out

Two newer codes also appear on marks: DH for dielectric heating and SF for sulphuryl fluoride fumigation. Both are approved treatments under ISPM 15. An unfamiliar code is not the same as a non-compliant one.

Export Pallet Rules by Destination

ISPM 15 is one of the IPPC international phytosanitary standards, the International Plant Protection Convention's rulebook for plant health in trade. It was first adopted in 2002 and last revised in 2018, and most countries that regulate wood packaging point straight to it. That is what makes ISPM-15 compliance portable: one mark works in most ports.

Most is not all. Every country writes the standard into its own law, adds its own exceptions and decides how strictly to inspect. Before you pick export pallets for a new lane, check the rule at the destination, not the origin.

LaneWhat appliesSource
Into the United StatesISPM 15 treatment and mark on regulated wood packaging; unmarked wood can be ordered reexported7 CFR 319.40-3, APHIS
Into the European UnionISPM 15 on wood packaging from outside the EURegulation (EU) 2019/2072
Between Great Britain and the EUISPM 15 required since January 1, 2021UK government guidance
Into CanadaISPM 15, except wood packaging made of U.S. or Canadian wood coming from the continental U.S.CFIA Directive D-98-08
U.S. to Canada and Canada to U.S.Exempt from treatment and marking when made of U.S. or Canadian woodCFIA D-98-08, 7 CFR 319.40-3
A starting point, not legal advice. Rules change; confirm with the importing country before shipping.

The U.S. rule sits in 7 CFR 319.40-3. It requires regulated wood packaging to be treated and marked with the IPPC symbol, the two-letter country code, the producer number and the treatment code, preferably on at least two opposite sides. It also lets an inspector at the port of first arrival order the immediate reexport of wood packaging that arrives without the mark.

Canada's Directive D-98-08, in its 11th version effective April 1, 2026, keeps the long-standing North American carve-out: wood packaging coming directly from the continental United States and made of U.S. or Canadian wood is exempt from treatment and marking. Hawaii and U.S. territories are outside that carve-out. Across the Atlantic, the UK government has required ISPM 15 on wood packaging moving between Great Britain and the EU since January 1, 2021, and the EU plant health regulation applies it to wood packaging entering the union.

Destination rules are only one layer of an export file. Food, pharma and regulated cargo add sanitation, documentation and temperature rules of their own, which we cover in our guide to pallet compliance for export shipping.

Key Takeaway

ISPM 15 is the floor in most markets, and the exceptions are where shipments get stuck. Check the destination's rule for every new lane, especially anything leaving North America.

How to Read an HT Pallet Stamp

Every compliant pallet carries the same four pieces of information in a fixed layout, so you can read an HT pallet stamp anywhere in the world once you know the order. The stamp is the evidence. Without it, a treated pallet is legally the same as an untreated one.

  1. The IPPC Symbol A stylized wheat ear on the left side of the mark, separated from the codes by a vertical line.
  2. The Country Code The ISO two-letter code for the country where the wood was treated or the pallet produced, such as US, CA or DE.
  3. The Producer or Treatment Provider Code A unique number assigned by that country's plant protection agency, joined to the country code by a hyphen, for example US-1234.
  4. The Treatment Code HT for heat treatment, DH for dielectric heating, MB for methyl bromide or SF for sulphuryl fluoride, on its own line or after a hyphen.

ISPM 15's Annex 2 sets the rules for pallet markings too. The mark must be rectangular or square, inside a border, legible to an inspector without a magnifier, durable and not transferable, and never hand drawn. It should appear on at least two opposite sides. Red and orange should be avoided because those colors are reserved for dangerous goods labels. Nothing else may sit inside the border, so logos go outside it.

On U.S. ht pallets you will usually see a second logo next to the mark. That is the inspection agency. Under an agreement with APHIS, the American Lumber Standard Committee accredits the third-party agencies that oversee U.S. heat treatment facilities and the producers who apply the mark. A producer cannot create its own ISPM 15 stamp; it has to enroll with an accredited agency.

Watch Out

Older marks that include DB, for debarked, are still accepted. ISPM 15 says countries should accept wood packaging marked under earlier versions of the standard.

One more thing to read on the pallet: the condition of the wood around the stamp. APHIS lists the warning signs it looks for, including illegible stamps, missing stamps, a mix of new and old wood, and signs of pests such as exit holes, feeding trails and frass, the fine powder boring insects leave behind.

Heat Treated Pallets for International Shipping

Buying heat treated pallets for international shipping is easy. Keeping them compliant all the way to the consignee is harder, because pallets get repaired, swapped and reused along the way. ISPM 15 is precise about what each of those does to the stamp.

  • Reuse A treated, marked pallet that has not been repaired or altered never needs re-treatment or a new mark for its whole service life.
  • Repair Replacing up to about one third of the components counts as a repair. Only treated or processed wood may be used, and each added treated component must carry its own mark.
  • Remanufacture Replacing more than about one third makes the pallet remanufactured. Old marks must be painted over or ground off, and the whole unit re-treated and marked again.

That rule catches people in reverse logistics. A dock crew nails a fresh, untreated board onto an HT pallet to keep it in service, and the pallet that left as compliant export packaging is now a liability. If the pallet came from a repair yard, ask how it was repaired.

Size matters on export lanes too. Ocean containers, foreign racking and automated systems abroad are often built around a different footprint than the 48 x 40 inch GMA pallet. ISO 6780 recognizes six standard footprints, including the 1200 x 800 mm Euro pallet and the 48 x 40 inch pallet. Our guide to Euro & GMA pallet sizes covers which one fits which market.

Dunnage and crating follow the same rules as the pallet. ISPM 15 calls out dunnage specifically: shippers must make sure every piece used to brace or support cargo is treated and visibly marked, and small offcuts that do not carry the whole mark should not be used.

Heat Treated Pallet Costs

Heat treatment adds energy, chamber time, record keeping and inspection agency fees to a pallet, and the price reflects it. How much depends on the supplier, the size, whether the pallet is new or recycled, and whether treatment is quoted separately or bundled into the unit price. We have not found an audited industry benchmark for the premium, so treat any single number you see online with caution and get quotes for your own pallet.

The bigger cost question is what happens over the pallet's life. An export pallet that leaves on a one-way lane has to be bought again for the next shipment. For the full math on purchase, repair, loss and disposal, see our comparison of plastic vs wood total cost.

Buying Heat Treated Pallets for Sale

Most pallet suppliers list heat treated pallets for sale alongside standard stock. The checks that matter happen before the truck shows up.

  • Ask Who Treats Them Get the treatment provider or producer code that will appear on the mark and the name of the inspection agency behind it.
  • Ask About Repairs For recycled HT pallets, ask whether any components were replaced and whether replacement boards were treated and marked.
  • Inspect a Sample Look for a clear mark on two opposite sides, little or no bark and no signs of insects before you accept the load.
  • Match the Footprint Confirm the size the consignee's racking and handling equipment expects, not just the size your own dock uses.

Hidden Export Delay Costs

The pallet price is visible. The cost of a rejected pallet is not, and it is usually larger. Under APHIS rules, shipments containing noncompliant wood packaging will not be allowed into the United States. The options are re-exporting the shipment, destruction under APHIS supervision, or in some cases safeguarding steps such as tarping or fumigation, and inspectors can issue an Emergency Action Notification that names the violation.

ISPM 15 describes the same menu for every country: detention while the problem is addressed, then removal of the material, treatment, destruction or reshipment. Each step adds time at the port, and time at a port costs money in storage, container detention and missed delivery windows, on top of the cost of the goods sitting still. None of it shows up on the pallet invoice.

4Codes a valid mark can carry: HT, DH, MB or SFIPPC, ISPM 15, 2018
1/3Share of replaced parts that turns a repair into a remanufactureIPPC, ISPM 15, 2018

Why It Matters

A pallet that costs a few dollars can hold up a container of goods worth far more. The cheapest export pallet is the one that clears inspection the first time.

Plastic Pallets & the Wood Packaging Exemption

ISPM 15 regulates wood. A pallet made of plastic or metal is outside its scope, so it needs no heat treatment, no fumigation and no stamp. APHIS says the same thing in plain terms: its wood packaging page lists plastic pallets, along with plywood, oriented strand board and metal frames, among the products that are not subject to APHIS wood packaging regulation.

That is the core case for durable plastic pallets on export lanes. There is no mark to check, no repair rule to break and no treatment record to chase. A plastic pallet that was compliant on its first trip is still compliant on its hundredth.

Our pallets are made from 100 percent recycled HDPE and are ISPM 15 exempt, so export loads on them need no heat treatment or fumigation. They are non-porous, moisture and pest resistant, with no nails or splinters, and they can be pressure washed between trips. Our durable plastic pallets guide covers the types, grades and load ratings.

There are honest limits. Exempt from ISPM 15 does not mean exempt from inspection: a plastic pallet caked in soil or carrying hitchhiking insects can still draw attention from an inspector. And a pallet that leaves on a one-way lane is gone, whatever it is made of. We design closed-loop leasing programs, so the strongest fit is a lane where pallets come back, such as a cross-border loop with a regular partner.

Every APS pallet also carries an embedded sensor module with cellular GPS, so a pallet that crosses a border reports where it is without anyone scanning it. On export lanes, that is the difference between knowing a pallet sat at a port for nine days and finding out when the customer calls.

A plastic pallet that clears inspection on its first trip clears it on its hundredth.

Export Pallet Checklist

Use this before every new export lane and spot check it on existing ones. Every item comes from a rule or a failure mode earlier in this guide.

  1. Check the Destination Rule Confirm whether the importing country applies ISPM 15 and any exceptions, such as the U.S. and Canada carve-out.
  2. Choose the Material Decide between heat treated wood, processed wood or plastic based on the lane, the return flow and the load.
  3. Verify the Mark On wood, confirm the IPPC symbol, country code, producer code and treatment code on at least two opposite sides.
  4. Inspect the Wood Reject pallets with bark beyond the tolerance, insect holes, frass or a mix of new and old boards.
  5. Control Repairs Keep untreated boards away from export pallets, and re-treat anything with more than about a third of its parts replaced.
  6. Mark the Dunnage Make sure every block, brace and board in the container is treated and carries the full mark.
  7. Match the Footprint Use the pallet size the destination's racking and equipment expect.
  8. Keep the Records File the supplier's treatment details with the shipment documents so you can answer an inspector quickly.

Key Takeaway

Most rejections are not exotic. They are a missing stamp, an illegible stamp or one untreated board nailed on during a repair.

Heat Treated Pallets FAQ

Do Plastic Pallets Need Heat Treatment?

No. ISPM 15 applies to wood packaging, so plastic pallets need no heat treatment, fumigation or ISPM 15 mark, and APHIS lists plastic pallets among products not subject to its wood packaging rules. They can still be inspected for soil or pests on their surface, so keep them clean.

What Does HT Mean on a Pallet?

HT means the wood was heat treated under ISPM 15: heated so the core of every piece reached at least 56°C for 30 continuous minutes. It appears in the mark with the IPPC symbol, a two-letter country code and the producer or treatment provider number. Other codes you may see are DH, MB and SF.

How Long Does Heat Treatment Last on a Pallet?

The mark does not expire. Under ISPM 15, a treated and marked pallet that has not been repaired, remanufactured or altered needs no re-treatment for its whole service life. Replace more than about a third of its parts and it must be re-treated and marked again. Heat treatment kills pests in the wood at the time; it does not stop mold or new damage.

Sources

  1. IPPC, ISPM 15: Regulation of Wood Packaging Material in International Trade, adopted 2018, published 2019
  2. IPPC, Adopted International Standards for Phytosanitary Measures (ISPMs)
  3. eCFR, 7 CFR 319.40-3, General permits; regulated wood packaging material
  4. USDA APHIS, Import Wood Packaging Material Into the United States, 2026
  5. USDA APHIS, Wood Packaging Material, 2025
  6. Canadian Food Inspection Agency, D-98-08: Entry Requirements for Wood Packaging Material Into Canada, 2026
  7. UK Government, Wood packaging material for import and export
  8. European Union, Commission Implementing Regulation (EU) 2019/2072
  9. European Union, Commission Regulation (EU) No 1087/2013 on methyl bromide reporting
  10. American Lumber Standard Committee, Wood Packaging Material Program
  11. ISO, ISO 6780: Flat pallets for intercontinental materials handling, principal dimensions and tolerances